Safe Scale Remover for Condensers Coils & Filter Cleaning
Nar-coil is a low-pH product developed to clean air-cooled condensers, evaporator coils and other finned cooling and heating coils from scale and corrosion development on the surfaces of the coils. Nar-Coil is a combination of wetting agents, acids and solvents specially made to clean aluminum finned of condensers coils. Nar-Coil is a safe scale remover, designed for heavy duty brightening and cleaning of equipment condenser fins coils, filters and other equipment surfaces.
Within minutes after the application of Nar-Coil, the chemical will dissolve all the scale deposits and will create foam that will expend outward from the center of the coil. The foam, as it expands outward through both the front and back of the coil, will loosen and remove even baked on contamination from the fin and tube surfaces.
Synergistic acid-based formulation.
High hard water tolerance.
Deep penetrating, foaming cleaner.
Removes oxidation and brightens.
Safer and less corrosive than HF-based cleaners.
Low odor.
Biodegradable.
1. Goggles, gloves and other protective garments should be worn
when using this product. System should be shut off.
2. Apply with a low pressure electrical or plastic sprayer
3. Prepare cleaning solution by mixing one part Nar-Coil with three
parts of water.
4. Spray cleaning solution onto dirty coils or surfaces and allow
it to remain in contact with the scale on the surfaces for 5-10
minutes.
5. Rinse thoroughly with water, then return system to service.
6. Rinse out sprayer as well as its spraying wand and nozzle.
See more products from this supplier.
Do you want to show products of your own company? Join FREE now!
